Hey, no offense, however your swim spa cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture seeps in and ends up being trapped between the outer vinyl shell and the cling wrap foam cores. The warm, damp environment is perfect for mold and mildew and other kinds of smelly things.
If wetness has actually penetrated further into the plastic wrapped foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and smelly slime, however also make the cover really difficult to remove, and not as effective at keeping the heat in the spa. Time for a much better kind of swim spa cover.
Smelly Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or used spots, torn joints. A spa cover that loses it’s arched roof line, to keep water draining pipes off properly, will ultimately start to puddle water, which is probably time to purchase a new swim spa cover! A spa cover with threadbare areas in the vinyl is likewise bad news, and although you can stave off the inescapable with a duct tape repair work, the water will win, ultimately.
• Not Removed Regularly. Remove your spa cover weekly for 2 hours of airing out. A much better cover can withstand longer durations, however it’s an excellent routine to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to enable wetness to get away do so, but don’t get rid of fragile foam panels unless absolutely needed.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, but it will not stop moisture effectively. Even the very best foam filled covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real service is a swim spa cover uses air to insulate instead of foam.
• Bad Spa Water. If the spa water is not preserved routinely with sanitizer and filtering, or is not shocked often enough, bacteria and algae can make the most of a hospitable environment to thrive. Low pH, high chlorine or high ozone levels can also weaken the underside of your spa cover. Since the cover is so close to the spa, it takes in the chemistry of the spa. Clean, clear and sanitary water is the very best environment to prevent stinky spa covers. (Sorry but this is simply BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor spa covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be worse than no roofing at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times per year, so that it always looks fantastic, and is protected from the aspects. Again, this actually isn’t going to stop the mold and mildew from growing inside a foam cover. However it will assist your spa dealer pay their bills.
Repair Your Hot Tub Cover!
• Remove to Safe Location: This primary step might appear obvious, however you require a great location to enable the cover to sit undisturbed from pets, wild animals, and winds. It ought to be a bright area if possible, or a dry indoor location with low humidity can likewise be used.
• Deodorize & Disinfect: You may not have to do both, it’s finest to be as gentle as possible. Do not use household cleaning products on your spa cover, strange chemicals can wind up in your spa water. Carefully tidy all outside surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, since the panels might become damaged during elimination or cleansing. However if you determine that there is something slimy within, you can usually unzip and eliminate the panel for a cleansing inside and out.
How typically does your spa dealer anticipate you to do all this? If your swim spa is protected from many sun and rain, twice annually. If it’s out in the open it must be 3-4 times annually. Let that sink in a minute.
Much better Choice
The simplest treatment for a smelly swim spa cover is to simply buy a various type of swim spa cover A foul-smelling swim spa cover merely indicates that your cover is handling wetness, and things are starting to grow! Swim Spa Covers from SpaCap.com that does not use foam however has actually sealed air chambers rather will avoid offering the mold and mildew a place to grow in the first place.